Finally got my PCM TUNER very good material and quality Thanks to the technical support for activating the soft super fast!! We'll try all of this later.

PCMtuner Is a nice simple ECU Programmetr hat is powerful & easy to use

Just what I was looking for!

Read Hyundai/Kia Continental SIM2K-241 ECU with pcmtuner success,  It has to be done in BSL 53 to get eeprom and full flash.

 I am so happy, Let me share the experence here: 

3 Step to Read and Write SIM2K241 with pcm tuner:

Step 1- read password with module 53 (module 53 sim2k-24x read password, if you can’t do this you cannot proceed!!). Read password BEFORE opening ecu and connecting PCB. Read password and save.

Step 2- solder boot and bridge. open ecu connect your boot and CNF connections to PCB and ensure they are correct. Power on device, read flash and eeprom (when asked select the password you saved).
SIM2K-241 PINOUT
Siemens SIM2K-241 on the desktop (smaller connector) :
1,2,4 – ECU Ground (just connect one of the contacts)
77 – CAN-High
60 – CAN-Low
3,5,6,75 – + 12V (main relay power supply)
41 – + 12V (ignition on)
58 – + 12V (unswitched power)
53 – output of the main relay control

Step 3- open ECU and use pcmtuner instructions as they are easier, select corresponding TCxx and flash, read module 53 tc1738-tc1767 (the ECU have both micros, you have two Processors (TC1767 TC1738) one gearbox one Engine).  when prompted for password, select password you previously saved. same for micro.

*You need to read password first in 53 BEFORE connecting in boot to read flash and EEPROM,. Also physically look at processor number as can be either.

---

PCMtuner ECU Programmer worked perfect and was here faster then it said

Was surprised at how inexpensive this model was. Have used it several times already. Easy to use. I'm a girl (not a mechanic), and I use it to trouble shoot all the time. Then I look up how to YouTube . So far, I've saved myself a decent chunk of cash by diagnosing and fixing several issues myself.

VAG 1.6TDI CAYC Simos PCR 2.1 boot unlock and OBD read/write – no problems! First open ecu cover and unlock, after unlock you can read/write via obd port.

Bmw F series Bosch EDC17C41,protocol 71,TC1797 read/write - no problem!Reading up to 1.5 minutes,writing 30-40 seconds!

Test ok, stage 1 trafic 3 1.6 dci 121ch EDC17C84. Reading obd ok, writing obd ok. Ford Focus mk3 2.0 tivct Bosch med17.2 obd, super easy and fast

The seller quickly sent and stole well, I have not checked the work yet.

pcmtuner really good , my first chiptuning tool , I really like it read good and give us free damos , never see others company give us these . Thank u pcmtuner .

PCMtuner ECU Programmer came very quickly. The disc is broken. The seller gave a link to the software.

Perfect support, activation only 1 hour. Today done Seat Leon EDC17C46 read VR and write

Vag edc17cp14 Bench mode - Protocol 71 flash and eeprom read/write Succesfull.

---

Fast delivery, in appearance, the quality is good, Here comes my test report :
Peugeot EDC17C60 BENCH Ok
Peugeot MEDC17 Bench Ok
BMW MEDC17 BENCH OK
Bmw edc17c41/50 read and write bench 
Ford sid208 boot OK
Ford Sid206 obd OK
Renault Sid310 obd OK
VAG simos10 OK
Ford Med172 ok
DSG dq200 bench OK
DSG dq500 bench OK
Dcm3.7 module 54 ok via obd (tested vw 1.2tdi)
Module71 bench OK or edc17c60 PSA (otp zone manually modified) after that.

---

Excellent. Received before the date. Everything ok. Thank you.I tested quite a lot of calculation it's good work

Good product I recommend dealing with the seller. Today did DPF off on a insignia 2011. Edc17c19 . Bench read/ write without any problems.

Externally it came whole. We have to go.

Shipping fast. I haven't checked the casee yt.

Goods received, check after receiving the PCMtuner ECU Programmer, have make video in facebook i have read EDC17C74 GOLF GTD